Concrete, demolition and drainage for homes across AcadianaConcrete and drainage in Lafayette
RockSolid Contracting
New concrete driveway formed with a rebar grid over a concrete culvert pipe at a roadside ditch, with a ready-mix truck backed up to the forms
Call (337) 520-8615 Request a Quote

How Much Does a Driveway Culvert Cost in Louisiana?

One national cost guide puts a professional driveway culvert replacement at $1,000 to $9,000. Its average is around $4,500. For the pipe alone, the same guide prices one 24 x 20 foot length of aluminum or galvanized steel pipe at about $800, and plastic pipe of the same size at $700.

These are market numbers, not our price list. In Louisiana, the town, the parish or the state has a big say in the price. It decides the pipe size, the pipe material and the permit. For driveway culvert installation around Lafayette and the yard drainage that feeds the ditch, we look at the ditch or your photos first, and the quote comes in writing.

What does a driveway culvert cost?

A driveway culvert is the pipe that carries a roadside ditch under your driveway. The national guide says culvert replacement costs move with the culvert length, the pipe type and the driveway material.

Market ranges and local fees, side by side:

What is pricedRange or feeKind of source
Driveway culvert replacement by a pro$1,000 to $9,000A national cost guide
Average culvert replacementAbout $4,500A national cost guide
Aluminum or galvanized steel pipe, one 24 x 20 foot lengthAbout $800A national cost guide
Plastic pipe, the same length$700A national cost guide
Driveway culvert permit, Breaux Bridge$300The City of Breaux Bridge’s culvert application
Pipe installation only, Breaux Bridge lots with an approved culvert table$150The City of Breaux Bridge’s culvert application
Culverts across more than 75% of the frontage, Breaux Bridge$400The City of Breaux Bridge’s culvert application
Driveway permit, driveway only, Carencro$200The City of Carencro’s driveway permit application

The guide’s numbers are national, so a job in Louisiana can land above or below them.

What drives the price of a driveway culvert here?

Pipe size. The national guide calls culverts of 10 or 12 inches typical. The Lafayette Consolidated Government (LCG) covers the City of Lafayette and unincorporated Lafayette Parish. Its design standards say the minimum size pipe for any culvert is 15 inches. In Breaux Bridge, the City’s Engineer sets the culvert size, grade and elevation before work can begin.

Length. The guide prices pipe by the 20-foot length. Along open-ditch roads, LCG allows at most 32 feet of culvert for one driveway crossing. A circle or horseshoe driveway can carry up to 56 feet.

Material. LCG’s standards say corrugated metal pipe, galvanized or coated, may not be used in the public right-of-way or in servitudes. So check the local rule before pricing metal pipe. Breaux Bridge allows concrete, or PVC for residential work only.

The ditch and the ends. A deeper ditch means more digging. The fill that goes back over the pipe and the way the ends are finished add work too.

The old pipe and the driveway on top. A replacement starts with digging out the old pipe. Often the part of the driveway over it comes out as well. LCG’s standards say the driveway inside the right-of-way must be the same or a more durable material than the street it joins.

What do the towns require before a culvert goes in?

Rules differ from one place to the next, and Carencro and Breaux Bridge publish their own culvert and driveway permits.

  • Lafayette and unincorporated Lafayette Parish. All driveways are required to be permitted, through a driveway permit application or a building permit application. No culvert goes in the drainage system without written approval from Public Works. A culvert permit can be requested at mypermitnow.org or by calling 337-291-5634.
  • Breaux Bridge. A permit is required before any drainage structure goes in the public right-of-way. The applicant calls a city inspector before covering the culverts. Culverts installed without an inspector are subject to removal. The permit expires 180 days after it is issued.
  • Carencro. The contractor calls the City so its inspector can verify the pipe installation the same day the work is done.
  • St. Martin Parish. In a parish ditch, a culvert starts with a Right of Entry request to Parish Public Works.
  • A state highway. On a state highway, the work is in DOTD right-of-way. A driveway onto a state highway has its own permit through DOTD, an access connection permit. DOTD’s form for single-family homes covers 1 to 5 homes on a single access connection.

That DOTD certificate has lines for the culvert’s diameter, length and material type, and for the approved driveway material inside the right-of-way. A DOTD district permit specialist approves it. Before any digging, the form has the applicant call Louisiana One Call. For digging in DOTD right-of-way, the applicant also contacts DOTD at least 24 hours ahead.

Who decides which culvert pipe you can use?

The town decides the pipe, not the buyer. LCG bars corrugated metal pipe from the right-of-way. In Breaux Bridge, black corrugated HDPE culverts are not authorized, even though the national guide prices plastic pipe for culverts. A pipe bought before the town signs off can turn out to be the wrong pipe.

So the size and the material come from the permit office first. The permit is sorted out before work starts.

Why do driveway culverts clog and back up?

Lafayette Regional Airport averages 62.81 inches of rain a year, in NOAA’s 1991 to 2020 normals. When silt, grass or leaves fill a culvert, the ditch backs up. Water then sits over the driveway or in the yard upstream.

Louisiana’s Civil Code also protects the natural flow of water. Under Article 656, the owner of the lower estate may not do anything to prevent the flow of the water.

Signs a culvert needs work:

  • Water stands in the ditch or over the driveway long after the rain stops.
  • The pipe end is crushed, rusted through or half full of dirt.
  • The driveway dips or cracks over the pipe.

A new pipe goes in at the size the town allows today. A culvert of the right size, kept clear, keeps a ditch flowing.

Can you replace a culvert while the driveway is out?

Yes. If the old driveway is cracked or sunken, a concrete removal and replacement job takes out the slab, and the old pipe is open to reach. The new culvert goes in at the size the town approves, and then the new drive is poured on top.

One of our own job photos shows a driveway torn out in front of a house with a new culvert pipe set. If the whole drive is going, the pour on top is a new concrete driveway. For that price, see what a concrete driveway costs in Louisiana.

Where do you start with a culvert or ditch problem?

Start with the ditch and the local rule, then get a real number. RockSolid Contracting is based in Lafayette and does concrete, demolition and drainage under one roof. We work about an hour’s drive around Lafayette, from the Acadiana towns east on Interstate 10 to Baton Rouge.

See yard drainage in Lafayette and Acadiana for catch basins, channel drains, swales and driveway culverts where the parish or city allows. We look at the job, or you send photos, and we put the quote in writing. Call or text (337) 520-8615.

Frequently asked questions

What size culvert do I need for my driveway?
The town or parish sets it, not the buyer. In LCG's area, 15 inches is the minimum size pipe for any culvert. In Breaux Bridge, the City's Engineer sets the size, grade and elevation before work can begin. On a state highway, DOTD's permit lists the culvert's diameter and length.
Do I need a permit for a driveway culvert?
In the towns covered here, yes. In LCG's area, a culvert permit can be requested at mypermitnow.org or by calling 337-291-5634. Breaux Bridge requires a permit before any drainage structure goes in the public right-of-way, and it charges $300 for a driveway culvert. The permit is sorted out before work starts.
What kind of pipe can I use for a driveway culvert?
The town decides. LCG's design standards say corrugated metal pipe may not be used in the public right-of-way. Breaux Bridge allows concrete, or PVC for residential work only, and black corrugated HDPE culverts are not authorized there. Ask the permit office before anyone buys pipe.
How long can a driveway culvert be?
Along open-ditch roads, LCG allows at most 32 feet of culvert for one driveway crossing. A circle or horseshoe driveway can carry up to 56 feet. In Breaux Bridge, culverts that extend across more than 75% of the property frontage carry a $400 fee.
Why does water back up at my driveway culvert?
A culvert clogged with silt, grass or leaves, or a crushed pipe, holds water back in the ditch. Lafayette Regional Airport averages 62.81 inches of rain a year in NOAA's normals, so the pipe gets a lot of use. A clear pipe of the right size keeps the ditch flowing.
Can a culvert be replaced at the same time as a driveway?
Yes. When the old driveway comes out, the pipe under it is open to reach, and the new culvert can go in before the new pour. The size and the material still follow the local rule.
Is this what RockSolid Contracting charges?
No. These are market numbers from a national cost guide and fees the towns publish, not our price list. We look at the job, or you send photos, and we put the quote in writing. Call or text (337) 520-8615.
Request a Quote

Get In Touch With RockSolid Contracting

Tell us about the job and the town it is in, and text us photos if you have them. Call or text (337) 520-8615 or use the form, and we will get back to you.

  • Call or text (337) 520-8615
  • Lafayette, LA · working about an hour around Lafayette, from the Acadiana towns to Baton Rouge
  • Written quotes · concrete, demolition and drainage

Request a Quote

Tell us about the driveway, slab, drainage problem or teardown and where it is. We look at the job and put the quote in writing.

Call (337) 520-8615